Eban 1000 Coating Thickness MeterThe Eban 1000 Coating Thickness Meter (Coating Thickness Gauge, Paint Meter, Paint Gauge), is one of the easiest to use and most cost effective Coating Thickness Meters on the market, with a user friendly back-lit display for operation in dimly lit locations.
This Eban 1000 Coating Thickness Meter is extremely easy to use by any operator, has single keypad operation and automatic switch off when no reading is being taken.
The Eban 1000 Coating Thickness Meter is calibration preset. No need to calibrate. If calibration is required, concealed controls for adjustment by an Inspector / Manager can be adjusted. The Eban 1000 can then be passed to any operator knowing that the calibration cannot be interfered with.
Special Unique Feature only on the Eban 1000 Coating Thickness Meter: The speed of measurement is virtually instant and this will allow coating variations to be seen if the probe is slid over the paint coating.
The Eban 1000 Coating Thickness Meter will measure all non-ferromagnetic coatings on Steel and Iron substrates eg. Paint, Epoxy, Tin, Copper, Zinc, Cadmium, Galvanizing, Metal Spray, Chrome, Powder Coating, Lacquer and Enamel etc.
This Coating Thickness Meter can be used by many different industries, e.g Automobile Paint Gauge, Electroplating Test Gauge, General Painting Coating Test G
Range of models
C1000 - Eban 1000 Ferrous 0-1000µm Integral Probe
C1001 - Eban 1000 Ferrous 0-40 Thou / USA mil Integral Probe
C1002 - Eban 1000 Ferrous 0-1000µm Flexible Detachable Probe
Accessories
NC001 - Calibration Certificate UKAS traceable
NC002 - Foils Calibration Certificate UKAS traceable
